There are a number of tanning bed lamps in each tan bed on the market. When you are getting a new, or especially a used or older tanning bed, make a good examination of the lamps. Ensure that they are proper tanning lamps and comply with the FDA guidelines with regard to health and safety. You should also consider how easy it is to get at the lamps. Make sure that the lamps are easy to change when needed. It is very important, and a lot cheaper, if you can carry out such routine maintenance yourself, if you have a home tanning bed.

There are two completely different sorts of bulbs used in low pressure and high pressure beds. Ensure you buy the right sun bed lamps for your sun bed, because you cannot use any bulbs you like. If you are ordering replacement bulbs on the Internet, check the make and model of your existing bed carefully. Ensure that the bulbs you are buying are made for your bed.

High Pressure Tanning Bulbs: high pressure beds have quartz-tube lamps in a multitude of sizes. The gases used in these lamps are pressurized to slightly higher than atmospheric pressure. The lamps in these beds are located in the hood of the bed, so that you tan only from above. When you have tanned the skin on one side of your body for about 10-12 minutes, you turn over and tan the other side. The flat bed of these tanners is a great deal more comfortable than a regular tanning bed.

The biggest advantage of these lamps is the short time you have to spend on the bed. Because you tan faster, you need to spend less time in the salon, which means it works out cheaper. You can achieve the level of tan you want in about three weeks of three to five sessions a week. With a conventional bed, it would take you at least a month to achieve the same level of colour. Maintaining your tan is much easier too. You only need two or three sessions a month to maintain the colour, compared with that many sessions every week on a conventional bed. Many of these lamps produce UVA rays only, not UVB rays which are responsible for burning.

Conventional Sun Bed Bulbs: Conventional, or low pressure beds use long tube lamps that resemble household fluorescent tubes. The lamps are situated above and below the bed of the sun bed, which means that all the body parts are tanned at the same time, without the need to change positions during the session.

Conventional beds use UVA and UVB rays in varying levels. Some use both and others use mostly UVA with a bit of UVB rays. UVA rays are responsible for the (premature) ageing effects on the skin and UVB rays are the burning rays that cause sunburn when you are outside in the sun. It is very important to discover which type of rays your sun bed emits. You must be sure to replace your existing bulbs with comparable new lamps after about 1,000 hours of use.

Another consideration when selecting the type of bed you use at home or in the salon, is the tanning bed lotion you will use. Different lotions suit different types of beds. The owner of your tanning salon will be able to help you choose a lotion that will work for the bed you are using and your skin type. Regardless of the bed you use, you should certainly always use a lotion or a cream, because they will moisturise your skin and help you tan faster.

Do you want to discover more about tanning bed bulbs? If so, please visit our web site on tanning bed bulbs Grab a totally unique version of this article from the Uber Article Directory